D-Link DWL-610 Manual page 16

Using the Configuration Utility (continued)
Site Survey > Add
In this window you can select
the type of network connection.
Click OK to save the
changes.
If you clicked on Add, you can
configure, in this window, all the
properties of a profile that you
wish to add to the network.
If you clicked on Configuration
or Properties you can config-
ure, in this window, all the prop-
erties of a profile that already
exists in the network.
If you select WPA in the
Authentication field, please
see detailed instructions for
configuring WPA on the
following pages.
If you choose to use the IEEE
802.1X feature, please see the
detailed instructions on the fol-
lowing pages.
Click OK to save the
changes.
Advanced
16