Appendix B: Configuration Examples; Configuring A Vap; Vap Configuration From The Web Interface - D-Link DWL-3600AP Administrator's Manual

Unified Access Point Administrator's Guide
A p p e n d i x B : C o n f i g u rat i o n E xa m p l es
This appendix contains examples of how to configure selected features available on the UAP. Each example
contains procedures on how to configure the feature by using the Web interface, CLI, and SNMP.
This appendix describes how to perform the following procedures:
• "Configuring a VAP"
• "Configuring Radio Settings"
• "Configuring the Wireless Distribution System"
• "Clustering Access Points"
• "Configuring Client QoS"
For all SNMP examples, the objects you use to AP are in a private MIB. The path to the tables that contain the
objects is iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).dlink(171).dlink‐products(10).dwl‐
ap(37).dwlWLANAP(26).
Configuring a VAP
This example shows how to configure VAP 1 with the following non‐default settings:
• VLAN ID: 2
• SSID: Marketing
• Security: WPA Personal using WPA2 with CCMP (AES)
VAP Configuration from the Web Interface
1. Log onto the AP and navigate to the Manage > VAP page.
2. In the Enabled column for VAP 1, select the check box.
3. Enter 2 in the VLAN ID column.
4. In the SSID column, delete the existing SSID and type Marketing.
5. Select WPA Personal from the menu in the Security column.
Additional fields appear.
6. Select the WPA2 and CCMP (AES) options, and clear the WPA and TKIP options.
D-Link
November 2011
Configuration Examples
Unified Access Point Administrator's Guide
Page 164