Section 3 - Configuration
Wireless Settings -
AP Mode
Wireless Band: IEEE 802.11g
Mode:
Access Point is selected from the pull-down menu.
SSID:
Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID's factory default
setting is default. The SSID can be easily changed to connect to an
existing wireless network or to establish a new wireless network.
SSID Broadcast:
Enable or Disable SSID broadcast. Enabling this feature broadcasts
the SSID across the network.
Channel:
6 is the default channel. All devices on the network must share the
same channel. (Note: The wireless adapters will automatically scan
and match the wireless setting.)
D-Link DWL-2200AP User Manual
17