Connecting Your Vcr To The Satellite Receiver Or Other Equipment; Plug & Auto Set Up - Samsung SV-271F Instruction Manual

Connecting Your VCR to the Satellite
receiver or Other Equipment
You can connect your VCR to the Satellite receiver or
other VCR using the SCART cable if the appropriate
outputs are available on the equipment chosen. The
following illustrations give a few examples of the
connection possibilities.
1
AV2 IN: By means of 21-pin Scart Cable
When the satellite receiver or other equipment is
connected to the AV2 socket, AV2 SET must first be
set to EXT.Plug the SCART Cable with satellite
receiver or other equipment into the AV2
(DEC./EXT.) socket on the rear of the VCR. After
making this connection, select the source by
pressing the input button for the AV2 input sources.
2
By means of RF Coaxial Cable
After making this connection, you must preset the
station received through the satellite tuner.
Satellite Receiver or other
Equipment
TV
SCARTC
able
Aerial
Aerial Connector
2
1 SCART Cable
AV2 (SATELLITE IN)
R
AV1 (EURO AV)
TV
L
Plug & Auto Set Up
Your VCR will automatically set itself up when it is
plugged into the mains for the first time. TV stations
will be stored in memory. The process takes a few
minutes. Your VCR will then be ready for use.
1
Connect the coaxial cable as indicated on page 7.
(Connecting Your VCR to the TV Using the Coaxial
Cable)
AV2 (SATELLITE IN)
R
AV1 (EURO AV)
TV
L
2
Plug the VCR into the mains.
Result: The LANGUAGE SET menu is displayed.
3
Select the required language by pressing the
or
buttons.
❷
4
Press OK to store the language selected.
Result: A message appears.
5
Press OK button.
6
Press the or
The VCR searches for the stations according
to a preset preference list corresponding to the
country that you have selected.
7
Press OK to start the auto scanning.
The number of stations automatically stored by
the VCR depends on the number of stations
that it has found.
8
The current time and date are displayed
automatically.
Check the date and time.
if it is :
Correct, Press Menu button twice to exit the
menu.
incorrect, see page 10.
Auto preset can be performed by pressing
(STOP) on the VCR continuously for 5 seconds or
more with no tape inserted.
ENG-9
TV
buttons to select your country.
❷