Basic Tv Tuner Operations; Inserting Batteries In The Remote Control; Copying From Dvd To Vcr - Samsung CHT-500H Instruction Manual

Basic TV Tuner Operations

4
GB
1
2
2
3

Inserting Batteries in the Remote Control

1
16
The following buttons are used when watching television via the
DVD-VCR's built-in TV tuner.
1 TV/VCR Button
Press to switch between your TV's tuner and the VCR's internal
tuner.
2 PROG Button
Press to change to the next or previous channel.
3 0-9 Buttons
Press to select channels directly.
4 INFO.
Press to display the channel you are watching.
Also works in DVD and VCR mode.
You must insert or replace the batteries in the remote control
when you:
Purchase the DVD-VCR
Find that the remote control is no longer working
correctly
1
Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2 Insert two AAA, RO3 or equivalent batteries, taking care to
respect the polarities:
+ on the battery with + on the remote control
– on the battery with – on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
Do not mix different battery types (manganese and
alkaline for example).

Copying from DVD to VCR

The DVD-VCR allows you to copy the contents of a DVD to a
VHS tape with a press of the COPY button.
If the DVD you are attempting to copy is copy
protected, you will not be able to copy the disc. It is not
permitted to copy Macrovision® encoded DVDs.
1
INSERT DISC
Insert the disc you wish to copy in the DVD deck and close the
drawer.
2
Insert VHS Tape
Insert a blank VHS videotape into the VCR deck.
3
Copy the DVD to VHS Tape
Press the COPY button on the DVD-VCR front panel.
The DVD will go into Play mode and the VCR will go into
Record mode.
If the DVD disc menu appears, you may need to press the
PLAY button manually to begin copying.
4
Stop the Copy Process
When the DVD is finished playing, press the VCR button on the
remote control and then press the STOP button to end the copy.
You must stop the Copy process manually when the DVD
movie ends or the DVD may replay and record over and over
again.
The copy is only active PAL Disc system.
EJECT
GB
SELECT VOL
STANDBY/ON PHONES
REC S.MODE COPY PROG P.SCAN
1
EJECT
VOL
SELECT
STANDBY/ON PHONES
REC S.MODE COPY PROG P.SCAN
2
ON PHONES
REC S.MODE COPY
3
4
4
17