Table of Contents
Advertisement
Connecting DVD-VCR to a Satellite Receiver or Other Equipment
You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
GB
The RCA input/output connectors on the rear of the DVD-VCR are used for equipment,
such as camcorders, VCRs or sound systems.
LINE
LINE
IN
OUT
R
AUDIO
L
VIDEO
REAR OF THE DVD-VCR
12
Plug & Auto Set up
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1
2
3
Camcorder
4
5
VCR
Sound system
Connect the coaxial cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
Plug the DVD-VCR into the mains.
Result:
The
Language Set
menu is displayed.
Select the required language by pressing the
or
buttons.
❷
Press OK to store the language selected.
Result:
A message appears.
Press OK to start the auto scanning.
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
Auto preset can be performed by pressing
(STOP) on
the VCR continuously for 5 seconds or more with no
tape inserted.
TV
DVD & VCR
IN
(FROM ANT.)
LINE
LINE
IN
OUT
R
RADIO ANT.
FM
RF
75
L
GB
OUT
COAXIAL
(TO TV)
AM
V
Auto setup
Please wait
00 %
Clock Set
Time
Date
Year
12 : 00
1/JAN
2004 THU
13
Advertisement
Table of Contents
