Cisco AJ732A - MDS 9134 Fabric Switch Release Note page 49

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c . c o m .
Workaround: This issue is resolved.
CSCsu84511
•
Symptom: When a Cisco MDS switch is configured to use an AAA server using TACACS+ and with
enabling the directed request option, a login using <user>@<server> provides the network-operator
privilege instead of the actual privilege mentioned in the ACS server. This happens once AAA
accounting is set to remote. A login without enabling the directed request option works as expected
and provides the appropriate privilege. This issue does not exist when using the RADIUS protocol
with the directed request option enabled.
Workaround: This issue is resolved.
CSCsu87264
•
Symptom: The Cisco MDS 9000 Family 1/2/4/8-Gbps 24-Port FC Module (DS-X9224-96K9) and
the Cisco MDS 9000 Family 1/2/4/8-Gbps 48-Port FC Module (DS-X9248-96K9) go to the OK state
when plugged into a Cisco MDS 9216i switch. The MDS 9216i switch does not support these two
modules in NX-OS Release 4.1(1b).
Workaround: This issue is resolved.
CSCsu90793
•
Symptom: Software failures occurred on a Gigabit Ethernet port when FCIP compression mode
auto was used.
Workaround: This issue is resolved.
CSCsu88059
•
Symptom: After first installing Fabric Manager Server (FMS) (with default flag displayFCoE =
false), and then stopping and restarting the FMS with displayFCoE = true, the FCoE interface tables
are not showing when the old disconnected client re-connects. As a result, the following four FCoE
menus do not launch the corresponding tables (FCOE, Virtual Interface Group, Virtual FC
Interfaces, Virtual Ethernet Interfaces).
Workaround: This issue is resolved.
CSCsv15452
•
Symptom: The Fabric Manager Server Performance Manager does not show fcflow statistics for all
devices. The Performance>Flows window shows n/a values for the vast majority of devices in many
VSANs.
Workaround: This issue is resolved.
CSCsv24238
•
Symptom: If you have host to storage connectivity issues, check the following counters to see if you
have increasing packet drops throughout the path that these devices traverse. Use the show
hardware internal packet-flow dropped command and the show hardware internal errors a
command to check the counters.
Workaround: This issue is resolved.
CSCsv40524
•
Symptom: When a SNMP user makes any changes to the zone database, in enhanced zoning mode,
the database is locked by the user. The zone dialog box when refreshed or launched will pop up a
warning indicating the zone database is locked. If the locking SNMP user making the change is same
as the SNMP user launching the zone dialog, this warning is not given (since this user can edit the
zone database). The commit button is enabled for this user.
Workaround: This issue is resolved.
OL-17675-05
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(3a)
Caveats
ll
49