Cisco AJ732A - MDS 9134 Fabric Switch Quick Reference Manual page 10

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Using Passive FTP to Access and Download the MIB Files
To access MIB files using passive FTP, you must know the names of the MIB files that you want to
download. See
access the Cisco MDS 9000 Family support list for the names of supported MIBs. These steps assume
that your passive FTP utility has UNIX-like commands.
To download MIB files with passive FTP, follow these steps:
Access ftp.cisco.com using passive FTP.
Step 1
Log in with your Cisco.com username and password, or as anonymous, with your e-mail address.
Step 2
Enter cd /pub/mibs/v2/ to change directories.
Step 3
Use the get command to copy the desired files to your local system.
Step 4
Use the quit command to exit passive FTP.
Step 5
MIBs Supported by Release in the Cisco MDS 9000 Family
The Cisco MDS 9000 Family supports several standard MIBs and Cisco-specific MIBs. For more
information about IETF-standard MIBs in the following tables, refer to http://www.ietf.org. For more
information about Cisco-specific MIBS, see
Family" section on page
The Cisco MDS 9000 Family MIB Quick Reference Guide applies to Cisco NX-OS Release 4.1(3) and
earlier Cisco MDS SAN-OS releases.
As of NX-OS Release 4.1(1b), SAN-OS has been changed to NX-OS. References to SAN-OS releases
Note
before 4.1(1b) still apply.
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© <2009> Cisco Systems, Inc. All rights reserved.
"Using HTTP to Access and Download the MIB Files from CCO" section on page 9
20.
the"Cisco-Specific MIBs Supported in the Cisco MDS 9000
to