Table of Contents
Advertisement
show diagnostic interface fc
show diagnostic interface fc
To display completed or ongoing diagnostic tests for Fibre Channel gateway ports, enter the show
diagnostic interface fc command in User Exec mode or Privileged Exec mode.
Syntax Description
port
all
Defaults
This command has no default settings.
Command Modes:
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Fibre Channel read-only user.
Command Output:
Table 6-14
Table 6-14
Field
test
port
validation
data-size
data-pattern
iterations
source-id
target-id
action
result
percentage-completed
result-string
Cisco SFS 7000 Series Product Family Command Reference Guide
6-42
show diagnostic interface fc {port | all}
Ethernet port, in slot#/port# notation.
Specifies all Ethernet ports on the Server Switch.
describes the fields in the show diagnostic interface fc command.
show diagnostic card Command Field Descriptions
Description
Test that ran or runs on the card.
Fibre Channel port number, in slot#/port# notation.
Displays enabled or disabled to indicate validation status.
Size of the test data.
Pattern of the test data.
Number of iterations of the test.
Source WWPN for the test.
Target WWPN for the test.
Last action that an administrator performed on the test.
Result of the last action that an administrator performed on the test.
Percentage of the test that has executed.
Result of the diagnostic test.
Chapter 6
Show Commands
OL-9163-02
Advertisement
Table of Contents
