D-Link xStack DES-3526DC User Manual page 91

xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
The following parameters can be set:
Parameter
Index
Server IP
Severity
Facility
UDP Port (514 or
6000-65535)
Status
To set the System Log Server configuration, click Apply. To delete an entry from the System Log Server window, click the
corresponding X under the Delete heading of the entry you wish to delete. To return to the Current System Log Servers window,
click the Show All System Log Servers
Description
Syslog server settings index (1-4).
The IP address of the Syslog server.
This drop-down menu allows you to select the level of messages that will be sent. The options
are Warning, Informational, and All.
Some of the operating system daemons and processes have been assigned Facility values.
Processes and daemons that have not been explicitly assigned a Facility may use any of the
"local use" facilities or they may use the "user-level" Facility. Those Facilities that have been
designated are shown in the following: Bold font means the facility values that the Switch
currently now.
Numerical Facility
Code
0 kernel messages
1 user-level messages
2 mail system
3 system daemons
4 security/authorization messages
5 messages generated internally by syslog line printer subsystem
7 network news subsystem
8 UUCP subsystem
9 clock daemon
10 security/authorization messages
11 FTP daemon
12 NTP subsystem
13 log audit
14 log alert
15 clock daemon
16 local use 0 (local0)
17 local use 1 (local1)
18 local use 2 (local2)
19 local use 3 (local3)
20 local use 4 (local4)
21 local use 5 (local5)
22 local use 6 (local6)
23 local use 7 (local7)
Type the UDP port number used for sending Syslog messages. The default is 0.
Choose Enabled or Disabled to activate or deactivate.
link.
77