D-Link xStack DES-3526DC User Manual page 113

xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Type
VLAN Name
Source IP
Destination IP
Dscp (0-63)
Protocol
To view the settings of a previously correctly configured rule, click
following screen:
The following window is the CPU Interface Filtering Rule Configuration for Packet Content.
Selected profile based on Ethernet (MAC Address), IP address or Packet Content.
Ethernet instructs the Switch to examine the layer 2 part of each packet header.
•
IP instructs the Switch to examine the IP address in each frame's header.
•
Packet Content Mask instructs the Switch to examine the packet header.
•
Allows the entry of a name for a previously configured VLAN.
Source IP Address - Enter an IP Address mask for the source IP address.
Destination IP Address- Enter an IP Address mask for the destination IP address.
This field allows the user to enter a DSCP value in the space provided, which will instruct the
Switch to examine the DiffServ Code part of each packet header and use this as the, or part of
the criterion for forwarding. The user may choose a value between 0 and 63.
This field allows the user to modify the protocol used to configure the CPU Interface Filtering
Rule Table; depending on which protocol the user has chosen in the CPU Interface Filtering
Profile Table.
Figure 6- 79. CPU Interface Filtering Rule Display for IP
in the CPU Interface Filtering Rule Table to view the
99