Bezel Blanks - HP 8100 - Elite Convertible Minitower PC Maintenance And Service Manual

Bezel Blanks

On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch external drive bays that
need to be removed before installing a drive. To remove a bezel blank:
1. Remove the access panel
2. Remove the front bezel
3. To remove a bezel blank, push the two retaining tabs that hold the bezel blank in place towards
the outer right edge of the bezel (1) and slide the bezel blank back and to the right to remove it
(2).
Figure 7-13
4. Replace the front bezel.
(Computer Access Panel on page
(Front Bezel on page
Removing a Bezel Blank
99).
100)..
Bezel Blanks 101