Use The Headset; Connect The Headset To A Mobile Phone; Automatic Power Saving; Control Your Calls - Philips SHB1400/00 User Manual

7 Use the headset

Connect the headset to a mobile phone

1
With the mobile phone turned on, press until the LED lights
up, to turn on the headset.
Once turned on, the headset reconnects automatically to
»
the last device it was connected to.
» If the last connected device is not available, the headset
tries to reconnect to the second to last device that was
connected to the headset. If it cannot find this device, it
will look for all previously paired devices in the order of
last usage, until it finds a device to connect to. The headset
stores up to 8 previously paired devices.
If you turn on the mobile phone or its Bluetooth feature after turning
on the headset, connect the headset from your mobile phone's
Bluetooth menu.

Automatic power saving

If the headset cannot find any Bluetooth device to connect to in
range within five minutes, it automatically powers down to save
battery life.

Control your calls

Turn the headset on/off Press until the LED turns on/off.
Check battery Hold VOL + and VOL - simultaneously.
> 50%: 1 blue flash
< 50%: 2 red flashes
< 25%: 3 red flashes
Pick up/end a call
Press .
Press VOL +/VOL -.
Adjust Volume
Redial the last number
Press twice quickly.
Reject a call
Hold .
Activate voice dialing
Hold until beep occurs.
Transfer a call to a
Hold during a call.
mobile phone
Mute the Mic
Press twice quickly during a call.

Manage 3-way calls

If your mobile phone and network operator support 3-way-calls, you
can manage 3-way-calls via the headset.
To hold the active call and
accept a waiting call
To drop the active call and
accept a waiting call
To swap the active call and the
call on hold
To drop the active call and
accept the call on hold
To drop the call on hold
To add the call on hold to an
active call

LED and sound indication

The red/blue LED flashes alternately. The headset is ready for
The blue LED flashes once every 3
seconds.
The red LED flashes twice every 5
seconds.
The blue LED flashes once every half
a second.
The blue LED flashes once every
second.
The red LED flashes three times and
beeps twice every minute.
Solid red LED
The LED is off.
The headset beeps every 5 seconds
Press while the 2nd call is
coming in.
Hold while the 2nd call is
coming in.
Press during a call.
Hold until a beep sound
occurs.
Press and VOL - until a beep
sound occurs.
Press and VOL + until a beep
sound occurs.
pairing.
The headset is connected
to the phone.
The headset is not
connected.
There is an incoming/
outgoing call.
The headset is active on
a call.
The battery is low in
power.
The headset is charging.
The headset is off./Charging
is finished.
The Mic is muted.
EN
9