Cisco Mesh Access Points Deployment Manual page 31

Mesh Network Components
• AC Power
• External Supply
• Internal Battery Backup (1552E and 1552H)
• Power over Cable (PoC)
• PoE-Out 802.3af compliant to connect IP devices such as Video Cameras (1552E and 1552H)
• 802.3af compliant PoE-Out to connect IP devices such as video cameras (1552E and 1552H)
This port also performs Auto-MDIX, which enables to connect crossover or straightthrough cables.
The 1550 series access points can be connected to more than one power source. The access points detect the
available power sources and switch to the preferred power source using the following default prioritization:
• AC power or PoC power
• External 12-VDC power
• Power injector PoE power
• Internal battery power
Table 3: Power Options in 1552 Models, on page 15
point models.
Table 3: Power Options in 1552 Models
Power Option
AC
Power over Cable
PoE (using Power
Injector)
DC (nominal 12
VDC)
Battery Backup
OL-27593-01
◦ 100 to 480 VAC (47-63 Hz)—Connecting AC or Streetlight Power (1552E)
◦ 100 to 240 VAC—Connecting AC or Streetlight Power (1552H)
◦ 12 VDC—Connecting DC Power Cable (All Models)
◦ 40 to 90VAC—Connecting Cable PoC (1552C)
◦ (PoE-Out) is not available when using Power Injector (PoE-In) as the power source
1552E
100 to 480 VAC
80W
Not Applicable
56V +/- 10%
11.4 – 15V
80W-hr
lists the power options available for the 1552 access
1552H
100 to 240 VAC
80W
Not Applicable
56V +/- 10%
11.4 – 15V
35W-hr
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
Cisco Outdoor Mesh Access Points
1552C 1552I
Not Applicable 100 to 277 VAC
50W
40-90 V (quasi- Not Applicable
square wave)
45W
Not Applicable Not Applicable
11.4 – 12.6V 11.4 – 15V
Not Applicable Not Applicable
15