What Is In The Box; Default Wireless Settings - NETGEAR WG111v3 - 54 Mbps Wireless USB 2.0 Adapter User Manual

NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v3 User Manual
In general, wireless devices can communicate through walls. However, if the walls are constructed
with concrete, or have metal, or metal mesh, the effective range will decrease if such materials are
between the devices.

What Is in the Box

The product package should contain the following items:
• NETGEAR 54 Mbps Wireless USB2.0 Adapter WG111v3
• Installation Guide
• Plastic cradle and fasteners to hold the WG111v3
• Resource CD, including:
– The Smart Wizard Installation Assistant
– This manual
• Warranty and Support information card
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the product.

Default Wireless Settings

If this is a new wireless network installation, use the factory default settings to set up the network
and verify wireless connectivity. If this is an addition to an existing wireless network, you need the
wireless network and wireless security settings that are already defined.
Your Wireless Adapter factory default basic settings are:
• Network Name Service Set Identification (SSID): ANY
Note: In order for the Wireless Adapter to communicate with a wireless access point
or wireless adapter, all devices must be set up to use the same wireless network
name (SSID).
• Network Mode (Infrastructure or Ad-hoc): Infrastructure
• Data security WEP, WPA2-PSK, or WPA-PSK encryption: Disabled
The section below provides instructions for setting up the Wireless Adapter for basic wireless
connectivity to an access point.
1-2
v1.0, March 2008