Ad Hoc Mode Is Not Working Correctly; Windows Xp Occasional Connection Problems - NETGEAR RB-WN111 User Manual

Ad Hoc Mode Is Not Working Correctly

You must click the Initiate Ad Hoc button before you click Apply. Here is how you start an Ad
Hoc network:
1. Fill in the Network Name (SSID) field.
2. Select the Computer-to-Computer (Ad Hoc) network type.
3. Click Initiate Ad Hoc.
4. Accept the default settings, or make your changes and click OK.
5. Click Apply.
Note: Be sure that all computers in your Ad Hoc network are configured with static IP
addresses in the same subnet.

Windows XP Occasional Connection Problems

Windows XP users who apply Windows XP Hotfix (SP2) Q815485 from the Windows XP Update
Service might not be able to connect to the Internet, might have dropped wireless connections, or
both when using the RangeMax Wireless-N USB 2.0 Adapter WN111v2. You can delete this
Hotfix from the Add or Remove Programs utility in the Control Panel.
To delete Windows XP Hotfix (SP2) Q815485:
1. Select Start > Control Panel > Add/Remove Programs.
2. Select Windows XP Hotfix (SP2) Q815485, and then click Remove.
• You might receive an error message that states that some program on the computer may
not work correctly if the update is removed.
• You can ignore this error message, and then click Yes to remove the update.
3. Restart your computer, and rerun the Smart Display Setup Wizard.
This should solve your connection issue. You can restore this hotfix by following this link:
http://microsoft.com/downloads/details.aspx?FamilyId=009D8425-CE2B-47A4-ABEC-
274845DC9E91&displaylang=en
NETGEAR RangeMax Wireless-N USB 2.0 Adapter WN111v2 User Manual
v1.0, May 2008
4-3