Setting Up Wep Encryption Security - NETGEAR RB-WN111 User Manual

NETGEAR RangeMax Wireless-N USB 2.0 Adapter WN111v2 User Manual
c. In the Security section, select WPA-PSK [TKIP] or WPA2-PSK [AES], and enter the
passphrase.
Figure 2-13
For more about WPA2-PSK, see the link to
3. Save your settings in a profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply, and then click Close to exit the Smart Wizard.

Setting Up WEP Encryption Security

Follow the steps below to configure WEP encryption security:
1. Run the WN111v2 Smart Wizard.
a. Make sure that the WN111v2 software is installed and the wireless-N USB adapter is
connected to the USB port in your computer.
b. Use the icon to open the Smart Wizard. The Settings tab displays.
2. Configure the Security settings.
a. In the Profile field, select the profile or type in a profile name.
b. In the Network Name (SSID) field, select the network, or enter the SSID.
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.
2-16
"Wireless Communications:" in Appendix
v1.0, May 2008
B.