Status; Status > Router - Cisco WRP400-G1 - Wireless Router Administration Manual

Data Fields

Status

Status
Cisco Small Business WRP400 Administration Guide
The Status module includes the following pages:
• "Status > Router" on page 148
• "Status > Mobile Network" on page 149
• "Status > Local Network" on page 150
• "Status > Wireless Network" on page 150
Status > Router
Router Information
Firmware Version
Current Time
Internet MAC Address
Router Name
Host Name
Domain Name
Internet Connection
Connection Type
Internet IP Address
Subnet Mask
Default Gateway
DNS1, DNS2, DNS3
MTU
The version number of the current firmware is
displayed.
The time set on the WRP400 is displayed.
The MAC address, as seen by your service
provider, is displayed.
The name of the WRP400 is displayed.
If required by your service provider, this was
entered on the Basic Setup screen.
If required by your service provider, this was
entered on the Basic Setup screen.
The type of Internet connection: Automatic
Configuration - DHCP, Static IP, PPPoE, PPTP,
L2TP, Telstra Cable
The IP address of your WRP400, as seen from
the Internet.
The subnet mask, as seen by users on the
Internet
The IP address of your service provider server.
The addresses of the Domain Name Servers
(DNS) servers for your Service Provider.
Maximum Transmission Unit. The largest packet
size that is permitted for Internet transmission.
Can be set manually or automatically.
B
148