Cisco PIX 520 - PIX Firewall 520 Online Help Manual page 196

System Properties>Advanced>FixUp
The FixUp panel is an informational listing of the services, protocols, and port numbers to which PIX Firewall
applies the Adaptive Security Algorithm (ASA). The ports listed by default, or those you specify, are the ports at
which the PIX Firewall listens for each respective service. You can change the port value for each service (except
RSH and SIP) by selecting the protocol you want to change from the tree on the left side of the panel.
The following sections are included in this Help topic:
Important Notes
Field Descriptions
Important Notes
The PIX Firewall enables FixUps based on the following default values:
FTP (ftp) port 21
H.323 (h323) port 1720
HTTP (http) port 80
RSH (rsh) port 514
RTSP (rtsp) port 554
SIP (sip) port 5060
Skinny (skinny) port 2000
SMTP (smtp) port 25
SQL*Net (sqlnet) port 1521
For more information about the protocols used in the FixUp panels, refer to the
Cisco Secure PIX Firewall Version
Field Descriptions
The FixUp Summary panel displays the following fields:
FixUp Summary table
Protocol—Displays the services or protocols assigned for FixUp.
Port Range—Lists the lower and upper port number range (if applicable) for the service or protocol.
x.x.
Configuration Guide for the