Electrolux E30MO65GSS - 1.5 cu. Ft. Microwave Oven Installation Instructions page 3

CONVECTION MICROWAVE OVEN INSTALLATION INSTRUCTIONS
EXHAUST DUCT ASSEMBLY
1. Insert the edge of DUCT (B) into the tab of DUCT (C).
Secure together by using SCREW (A) provided in the kit.
Remove the existing screw (#1) and (#2) at the upper right
and left rear of the oven. Secure DUCT (C) with screw (#1)
and DUCT (B) with SCREW (#2) just removed from the
oven. See illustration 2.
Illustration 2
DUCT B
#2
SCREW A
Illustration 4
DUCT C
#1
SCREW A
2. Position DUCT (A) on the top of the oven inserting edge
of DUCT (BC) assembly into five tabs of DUCT (A). Tighten
two SCREWS (A), securing DUCT (A) to DUCT (BC). See
illustration 3.
3. Position DUCT (D) on top of the oven and insert it into five
tabs of DUCT (A). Secure DUCT (D) using two SCREWS (A)
provided. See illustration 4.
Illustration 3
DUCT A
SCREW A
DUCT BC
DUCT D MUST
INSERT INTO
DUCT A
DUCT D
DUCT D
DUCT A
SCREW A
3
DUCT A MUST INSERT
INTO DUCT BC
DUCT A
FLANGE FROM
DUCT A WILL BE
FLUSH WITH CORNER
OF MICROWAVE
DUCT BC
SCREW A
THESE TWO
FLANGES
MUST MATE
TOGETHER