Download Print this page

Electrolux E30MO65GSS - 1.5 cu. Ft. Microwave Oven Installation Instructions

Convection microwave oven
Hide thumbs Also See for E30MO65GSS - 1.5 cu. Ft. Microwave Oven:

Advertisement

Quick Links

CONVECTION MICROWAVE OVEN INSTALLATION INSTRUCTIONS
INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
IMPORTANT - PLEASE READ AND FOLLOW
Before beginning, please read these instructions completely and carefully.
Be sure to DISCONNECT THE PLUG of the microwave oven from the electrical outlet before installing the built-in trim kit.
Remove the turntable from the oven cavity.
Because the kit includes metal parts, caution should be used in handling and installation to avoid the possibility of injury.
Do not remove permanently affixed labels, warnings, or plates from the product. This may void the warranty.
Please observe all local and national codes and ordinances.
The installer should leave these instructions with the consumer who should retain for local inspector's use and for
future reference.
PARTS INCLUDED IN THE KITS
1) Front Frame Assembly
QTY 1
6) Duct A
QTY 1
Printed in United States
The electrical requirements for this oven are 5-20 volts AC, 5 amps or larger.
2) Bottom Duct Assembly
QTY 1
7) Duct B
QTY 1
3) Screw A ( ¹ ₂" length)
4) Screw B (1 ³₄" length)
QTY 5
8) Duct C
QTY 1

5) Screw C (1 ³₁₆" length)
QTY 4
QTY 2
9) Duct D
QTY 1
TINSEB472MRR0

Advertisement

loading

Summary of Contents for Electrolux E30MO65GSS - 1.5 cu. Ft. Microwave Oven

  • Page 1 CONVECTION MICROWAVE OVEN INSTALLATION INSTRUCTIONS INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER. IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE. READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. The electrical requirements for this oven are 5-20 volts AC, 5 amps or larger. IMPORTANT - PLEASE READ AND FOLLOW •...
  • Page 2 CONVECTION MICROWAVE OVEN INSTALLATION INSTRUCTIONS NOTE: 1. Base must be capable of supporting 200 pounds (90.7 kg). 2. Make sure base is level and front of cabinet is square. If the cabinet base is not level, the oven will tend to slide out when opening the door. 3.
  • Page 3 CONVECTION MICROWAVE OVEN INSTALLATION INSTRUCTIONS EXHAUST DUCT ASSEMBLY 1. Insert the edge of DUCT (B) into the tab of DUCT (C). 2. Position DUCT (A) on the top of the oven inserting edge Secure together by using SCREW (A) provided in the kit. of DUCT (BC) assembly into five tabs of DUCT (A).
  • Page 4: Cabinet Installation

    CONVECTION MICROWAVE OVEN INSTALLATION INSTRUCTIONS CABINET INSTALLATION 1. Place oven on the Bottom Duct Assembly. Adjust the in the the prepared opening. See illustration 5. Avoid position of the feet of the oven so that they are fitted pinching the cord between the oven and the wall. When into the recesses of the Bottom Duct Assembly.