Controls; About The Washer Control Panel - GE GTUP240EMWW Owner's Manual

About the Washer control panel.

Fabric
Step 1
Softener
Detergent
• Add detergent
• Add fabric softener (optional)
• Add bleach (optional)
Lid Lock
Your washer has a security system that prevents opening the lid during the spin cycle. The lid lock pre-
vents anyone (especially children) from reaching into the washer while the basket is spinning. The lid lock
will be release within 5 seconds after the basket stop spinning. Trying to open the lid while locked could
result in injuries. If the lid does not unlock after spinning, please contact service.
NOTE: If there is a power outage the lid lock can take 3 minutes to release.
A
F

Controls

A
Wash Cycle Selector
The wash cycle controls the length and intensity of the washing process. The knob can be turned in either direction. Turning the
Cycle Selector knob after starting a cycle will stop the washer and reset the cycle to the new selection. Press START to begin the
new cycle selection.
The chart below will help you match the wash cycle setting with your clothing. The chart is ranked from longest to shortest
cycle time and wash intensity. (Cycles vary by model.)
COTTONS - For heavy to lightly soiled cottons, household linens, work and play clothes.
PERMANENT PRESS - For wrinkle-free and permanent press items, and knits.
DELICATES - For lingerie and special-care fabrics with light to normal soil.
SPIN ONLY - For draining the tub and spinning water out of clothes.
QUICK RINSE - Rinses and spins non-soiled items where a rinse only is desired.
OFF - Washer is turned off and the START button does not function.
NOTE: When the control is turned to OFF, the STATUS lights are off.
NOTE: The cycle selector does not rotate during the operation of the washer.
B
FABRIC SOFTENER
Set this option when adding fabric softener to the washer.
6
Liquid
Bleach
• Add clothes
C D
B
Step 2
• Select load size and
other wash options
• Select wash cycle
Quick Start Guide
E
Step 3
Step 4
• Close lid
• Push START