Paper Orientation For Printing On Both Sides Of The Paper - Brother HL 5030 - B/W Laser Printer Service Manual

4.8

Paper orientation for printing on both sides of the paper

The printer prints the second page first.
If you print 10 pages on 5 sheets of paper, it will print page 2 then page 1 on the first sheet of
paper.
It will print page 4 then page 3 on the second sheet of paper.
It will print page 6 then page 5 on the third sheet of paper, and so on.
When doing manual duplex printing, the paper must be put in the paper tray in the following
way:
*For the manual feed tray or the multi-purpose (MP) tray
Put the side to be printed on first, in face-up, with the leading edge (top) of the paper in first.
To print the second side, put the paper face down, with the leading edge (top) of the paper in
first.
If letterhead paper is used, this would be put in to the MP tray with the heading facedown,
and in first.
To print the second side, put the heading face up and in first.
*For the upper paper tray and the optional lower tray (tray 1 or tray 2)
Put the side to be printed on first, face down, with the leading edge (top) of the paper at the
front of the tray.
To print the second side, put the paper face up, with the leading edge (top) of the paper at
the front of the tray.
If letterhead paper is used, this would be put in to the paper tray with the heading face up,
and at the front of the tray.
To print the second page, put the heading face down and at the front of the tray.
HL-5030/5040/5050/5070N SERVICE MANUAL
2-27