Error Message Printouts - Brother HL 5030 - B/W Laser Printer Service Manual

Error message
Resolution Reduced to
Enable Printing
(The printer has printed the
document at a reduced
resolution)
Toner Empty
Toner Low
3.2

Error Message Printouts

The printer will report problems by printing an error message as defined in the following table.
Take the corrective actions for the error message.
Error message
MEMORY FULL
PRINT OVERRUN
RESOLUTION REDUCED TO
ENABLE PRINTING
(The printer has printed the
document at a reduced
resolution)
*NOTE:
The communication parameter settings are printed on the Print Settings sheet. For details on
how to print the Print Settings page, see
COUNTER in chapter
•
Reduce the complexity of your document before you
print to prevent automatic reduction of the resolution.
•
Expand the printer memory by adding a commercially
available DIMM memory module.
•
See 1.2 Toner cartridge in Chapter 5.
•
Purchase a new toner cartridge and have it ready for
when the Toner Empty status is indicated.
•
Press the Go button to print the data left in the printer.
Press the Job Cancel button if you want to delete the
data left in the printer.
•
Reduce the print resolution or reduce the complexity of
your document.
•
Expand the printer memory by adding a commercially
available DIMM.
•
Press the Go button to print the data left in the printer.
Press the Job Cancel button if you want to delete the data
left in the printer.
•
If this does not clear the error, reduce the complexity of
your document or reduce the print resolution.
•
Expand the printer memory by adding a commercially
available DIMM.
•
Set page protection to ON by using the supplied
Windows driver or RPC program.
•
Change the following settings in the supplied Windows
driver and try again. The best combination of these
settings will vary depending on your document:
Graphics Mode
TrueType™ mode
Use Printer TrueType™ Fonts
•
Reduce the complexity of your document before you
print to prevent automatic reduction in the resolution.
•
Expand the printer memory by adding a commercially
available DIMM.
2.HOW TO KNOW DRUM UNIT LIFE & PAGE
7.
6-7
HL-5030/5040/5050/5070N SERVICE MANUAL
Remedy
Remedy