Honeywell 6271C - Ademco TouchCenter Color Keypad User Manual page 38

User Code Setup (cont'd)
SCREEN
38
ACTION
10. If this user is assigned an RF button
zone, touch the box below the RF Button
Zone. The "RF Button Zone " screen is
displayed with the instructions to enter 3
digits. If interfacing to a residential panel,
enter 0 as the first digit. Enter the RF
Button Zone number that was previously
programmed in the control panel. Note
that the RF Button Zone does not appear
for every user. The User Options screen
will be redisplayed.
11. Press the SAVE button. The system
will save the configuration. When the
save is complete, the User Setup screen
is displayed with the new user's name
shown.