Choosing An Aspect Ratio Or A Zoom Level From The Size Menu - Cisco LCD-110-PRO-52S User Manual

Chapter 4 Adjusting Display Settings
Related Topics
•
•
•

Choosing an Aspect Ratio or a Zoom Level from the Size Menu

You can choose options that change which aspect ratio or zoom level is in effect on your display. These
options are not available when Dynamic Contrast mode is turned on.
Before You Begin
•
•
•
•
Procedure
From the main menu, select Picture > Size.
Step 1
Select an option.
Step 2
The available options are as follows:
•
•
•
•
•
To save your selection and implement it, push Enter.
Step 3
Related Topics
•
•
•
OL-17986-01
Locking Front Panel Controls and the Remote Control, page 2-7
Turning Automatic Contrast Optimation On or Off from the Dynamic Contrast Menu, page 4-6
About the Remote Control, page 2-6
This procedure assumes that your remote control and the front panel controls on your LCD display
are not locked.
This feature is not available when the Video Wall option is enabled.
The Zoom1 option and the Zoom2 option are not compatable with HDMI.
The Just Scan option is available only with an HDMI signal cable, when you have chosen HDMI
from the Source List menu.
16:9 — Sets the image aspect ratio to 16:9.
Zoom 1 — Magnifies the normal image less than Zoom 2 does.
Zoom 2 — Magnifies the normal image more than Zoom 1 does.
4:3 — Sets the image aspect ratio to 4:3.
Just Scan — Shows the full image without trimming when the input signal is HDMI, 720p, 1080i,
or 1080p.
Locking Front Panel Controls and the Remote Control, page 2-7
Turning Automatic Contrast Optimation On or Off from the Dynamic Contrast Menu, page 4-6
Turning the Video Wall Feature On or Off from the Video Wall Menu, page 4-16
User Guide for Cisco LCD Professional Series Displays
Using the Picture Menu
4-7