Upgrading The Firmware - Cisco WAP4410N - Small Business Wireless-N Access Point Administration Manual

Configuring the WAP4410N Wireless-N Access Point
Administration
!
CAUTION
!
CAUTION
STEP 1
WAP4410N Wireless-N Access Point with Power Over Internet

Upgrading the Firmware

The Administration > Firmware Upgrade page allows you to upgrade the access
point's firmware.
Do not upgrade the firmware unless you are experiencing problems with the
access point or the new firmware has a feature you want to use.
Upgrading the firmware deletes all custom settings.
To upgrade the firmware of the access point, follow these steps:
Back up the configuration settings of your access points (see
Access Point's Configuration" on page 60).
6
"Managing the
58