Cisco AIR-AP1252AG-A-K9 Hardware Installation Manual page 122

Table A-1 Access Point Specifications (continued)
Category 2.4 GHz Radio Specifications
Power Output 802.11b
23 dBm
20 dBm
17 dBm
14 dBm
11 dBm
8 dBm
5 dBm
2 dBm
-1 dBm
(Depending on the regulatory
domain in which the access
point is installed)
Note
Antenna Three external antenna connectors on each radio module.
Frequency 2.400 to 2.497 GHz
(Depending on the regulatory domain in which the access point is
installed)
Compliance The 1250 series access point complies with UL 2043 for products installed in a building's
environmental air handling spaces, such as above suspended ceilings.
Caution
Safety IEC60950-1
UL60950-1
CAN/CSA C22.2 Number 60950-1-03
EN60950-1
UL 2043
Radio Approvals FCC Parts 15.401 -15.407
FCC Bulletin OET-65C
RSS-210 and RSS-102
EN 301.893
AS 4268.2
ARIB STD-T71
Telec 33B
Cisco Aironet 1250 Series Access Point Hardware Installation Guide
A-2
802.11g and 802.11n
17 dBm
14 dBm
11 dBm
8 dBm
5 dBm
2 dBm
-1 dBm
(Depending on the regulatory
domain in which the access point
is installed)
For the maximum power and the channels allowed in your regulatory domain, refer to the
Channels and Maximum Power Settings for Cisco Aironet Autonomous Access Points and
Bridges or the Channels and Maximum Power Settings for Cisco Aironet Lightweight Access
Points.
The 1250 power injector (AIR-PWRINJ4), the 1250 DC power module
(AIR-PWR-SPLY1), and the antennas should not be placed in a building's environmental
air space, such as above suspended ceilings.
Appendix A Access Point Specifications
5 GHz Radio Specifications
80211a and 802.11n
50 mW (17 dBm)
25 mW (14 dBm)
12 mW (11 dBm)
6 mW (8 dBm)
3 mW (5 dBm)
2 mW (2 dBm)
1 mW (-1 dBm)
(Depending on the regulatory
domain in which the access point
is installed)
5.15 to 5.25 GHz
5.25 to 5.35 GHz
5.470 to 5.725 GHz
5.725 to 5.85 GHz
(Depending on the regulatory
domain in which the access point
is installed)
OL-8247-03