Linksys WVC200 - Wireless-G PTZ Internet Camera Quick Installation page 2

K
If your network uses static IP
addresses, select Static IP address,
click Next, then go to Step L.
If your network uses a DHCP server
to assign IP addresses to network
devices, keep the default setting,
Automatic Configuration-DHCP,
click Next, then go to step M.
L
Enter an IP Address, Subnet Mask,
Default Gateway, Primary DNS, and
K
Secondary DNS that corresponds
with your network's settings, then
click Next.
M
If you want your camera to
communicate using a wireless access
point or router, select Infrastructure
as the Mode Setting, then click Next.
If you want your camera to
communicate without using a
wireless access point or router,
select Ad-Hoc as the Mode Setting,
then click Next.
L
M
N
On the Wireless Settings screen,
change the following settings:
• SSID: Enter the SSID name of your
wireless network.
• Channel: If you selected Ad-Hoc
mode in step M, select the channel
that matches your Ad-Hoc network.
When you have finished making
changes, click Next.
N
O
Select the wireless security setting
that matches your wireless network,
then enter the required information
for the type of security you're using,
then click Next.
If your network doesn't have wireless
security enabled, select Disabled,
then click Next.
P
Review the new settings for your
Camera, then click the Next button.
O
P
Q
Click OK to save the new settings or
click Cancel to discard your changes.
R
You see a Congratulations screen like
this one. Click Install Viewer &
Recorder Utility to install the
Q
software on your PC.
Setup is complete. You can relocate the
Camera after you install the Utility
and/or the SoloLink service.
R
For additional information or troubleshooting
help, refer to the User Guide on the Setup
Wizard CD-ROM. You can also e-mail for
further support.
24 Hour Technical Support
800-326-7114
(toll-free from US or Canada)
E-mail Support
support@linksys.com
Website
http://www.linksys.com or
http://support.linksys.com
RMA (Return Merchandise Authorization)
http://www.linksys.com/support
FTP Site
ftp://ftp.linksys.com
Sales Information
800-546-5797 (800-LINKSYS)
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2006
Cisco Systems, Inc. All rights reserved.
WVC200-QI-60330NC BW