Linksys WVC200 - Wireless-G PTZ Internet Camera Quick Installation

Package Contents
• Wireless-G PTZ Internet Camera with Audio
• Power Adapter
• Ethernet Network Cable
• Setup CD-ROM with on-screen User Guide
• SoloLink DDNS Free Trial Card
• Registration Card
Wireless-G
PTZ Internet Camera
Quick Installation
with Audio
WVC200
Model
1 Set up the Wireless-G PTZ Internet Camera
with Audio
A
Insert the Setup CD-ROM into your CD
or DVD drive. You see a screen like
this one. If it doesn't appear
automatically, click the Start button,
choose Run, type D:\wvc200.exe in
the Open field (where "D" is the drive
letter of your CD or DVD drive), then
click OK.
B
Click the Click here to Start button.
C
Read and agree to the license B
agreement, then click Next.
D
Connect the included Ethernet
network cable to your network
router or switch, then click Next.
C
D
E
Connect the other end of the cable to
the Camera's ETHERNET port, then
click Next.
F
Connect the included power adapter
to the Camera's POWER port, plug the
other end into a standard electrical
outlet, then click Next.
G
Make sure that the Camera's LEDs
are lit, then click Next.
E
F
G
H
In the Selection box, select the
Camera you're installing, write down
the IP address of the Camera, so you
can access the Web-based utility
later, then click Next. If the Camera
you want is not displayed in the
Selection box, click Search Again.
I
For increased network security,
type admin, in lowercase letters,
in the Administrator Name and
Administrator Password fields,
H
then click OK. (You can change
the administrator name and
administrator password using the
Camera's Web-based Utility later.)
J
On the Basic Settings screen, change
the following settings:
• Camera Name: Enter a unique
name, up to 15 characters, for the
Camera. Unique names are helpful
when you are using multiple
Cameras on the same network.
• Description: Enter a description,
I
up to 32 characters, with additional
information, such as the location,
for the Camera.
• Time Zone: Select the time
zone that corresponds with
the Camera's location.
• Date: Enter the current date in the
provided fields.
• Time: Enter the current time in the
provided fields.
When you have finished making
changes, click Next. J