Netgear Universal Remote Control - NETGEAR EVA9150 - Digital Entertainer Elite User Manual

Digital Entertainer Elite EVA9000/9150 User Manual
Table 1-1. Rear Panel Description (continued)
Item
USB v2.0 port
10/100 Mbps Ethernet port with
LEDs
Reset button
Fan
Power connector
On/Off switch
Wireless antennas
(internal)
The only inputs on the Digital Entertainer Elite are the USB ports and the Ethernet port.

NETGEAR Universal Remote Control

Use the NETGEAR Universal Remote to operate the Digital Entertainer Elite and up to three
additional home entertainment devices. This guide describes how to use the remote with your
Digital Entertainer Elite, EVA9000/9150. For information about programming your remote to
control other devices, see the Universal Remote User Manual.
Tip: If the Digital Entertainer Elite does not respond when you are using your remote,
press the
1-6
Compatible Equipment and Cables
USB mass storage devices such as hard drives, media players
(including Windows- or Mac-formatted Apple iPods), and flash memory
devices.
Cat 5 network cable (included in the package) that you can use with
this port to connect the Digital Entertainer Elite to a wired local area
network (LAN).
Reset the Digital Entertainer Elite to its default factory settings. To
reset, press and hold the button down while the unit is powering up.
The Power LED blinks to acknowledge the reset request.
Fan for cooling the optional internal hard drive. The fan operates only
when a hard drive is installed.
IEC Digital Entertainer Elite power cord (included).
Turns the Digital Entertainer Elite on or off.
The internal wireless antennas support IEEE 802.11n, IEEE 802.11g,
and IEEE 802.11b. Keep the internal wireless antennas clear of
metallic obstructions.
DE button on the device and try again.
v1.0, March 2009
Welcome to the Digital Entertainer Elite