Physical Specifications; Ordering Information - Cisco ATA 186 Datasheet

Line-Echo Cancellation
Echo canceller for each port
8 ms echo length
Nonlinear echo suppression (ERL greater than 28 dB for f = 300 to 3400 Hz)
Convergence time = 250 ms
ERLE = 10 to 20 dB
Double-talk detection
Voice Features
Voice activity detection (VAD)
Comfort noise generation (CNG)
Dynamic jitter buffer (adaptive)
Fax**
G.711 fax pass-through
G.711 fax mode
** Success of fax transmissions up to 14.4 kbps depends on network conditions and fax modem/fax machine tolerance to those conditions. Network must have
reasonably low network jitter, network delay, and packet loss rate.

PHYSICAL SPECIFICATIONS

Click here http://www.cisco.com/application/pdf/en/us/guest/products/ps514/c1176/ccmigration_09186a008020bcc6.pdf
product specifications and regulatory compliance information in PDF format.

ORDERING INFORMATION

Table 2. Cisco ATA 186 Analog Telephone Adaptors
Description
Cisco ATA 186 with 600 ohm impedance
Cisco ATA 186 with complex impedance (270 ohm in series with 750 ohm and 150 NF in parallel)
CallManager Unit license for each ATA (1 per device required)
Unit license for SIP, for each ATA (1 per device required)
Cisco CallManager Express license for each ATA (1 per device required)
Table 3. Cisco ATA 186 Power Supply Cables
Description
ATA power supply cable for North America
ATA power supply cable for Continental Europe
ATA power supply cable for United Kingdom
ATA power supply cable for Australia
ATA power supply cable for Argentina
ATA power supply cable for Japan
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Part Number
ATACAB-NA
ATACAB-EU
ATACAB-UK
ATACAB-AU
ATACAB-AR
ATACAB-JP
© 2006 Cisco Systems, Inc. All rights reserved.
Page 4 of 7
to view the physical
Part Number
ATA186-I1-A
ATA186-I2-A
SW-CCM-UL-ANA
SW-SMH-UL-ATA-1P
SW-CCME-UL-ANA