Chapter 5: Troubleshooting
5.1 WebPAM PROe system event log
Controller
The controller parameter(s)
changed by user
The controller has new
crash information
Controller temperature is
above the warning
threshold
Controller temperature is
above the critical threshold
Controller temperature is
within the warning threshold
Disk Array
New disk array has been
created
Disk array has been deleted
Disk array has been added
Disk array has been
removed
Disk array settings have
been changed
Enclosure
Enclosure temperature is
above the warning
threshold
Enclosure temperature is
above the critical threshold
Enclosure temperature is
within the normal range
Corrective Action
The user successfully changed controller
settings.
Check the event logs.
The controller is overheating. Check for
airflow around and through the controller,
and verify that all fans are working. Replace
fans as needed.
The controller is seriously overheating.
Check for airflow around and through the
controller, and verify that all fans are
working. Replace fans as needed.
Normal.
Corrective Action
Result of settings or user action. Normal.
Result of settings or user action. Normal.
Result of settings or user action. Normal.
The physical drives of the disk array were
removed from the enclosure.
The user successfully disk array settings.
Corrective Action
The chassis is overheating. Check for
airflow around and through the chassis, and
verify that all fans are working. Replace fans
as needed.
The chassis is seriously overheating. Check
for airflow around and through the chassis,
and verify that all fans are working. Replace
fans as needed.
Normal.
143