Front-Panel Description; Leds - Linksys SFE2000P - Managed Ethernet Switch Installation And Administration Manual

Front-Panel Description

The RPS1000 front panel includes the status LEDs for the RPS1000 and a STBY/ACTIVE button.

LEDs

The LEDs display the status of the RPS1000 and show whether the RPS1000 is powering a
connected device. LEDs can be off, green, or amber.
The six DC output LEDs display the status of the six output connectors that you use to connect to
supported devices. The output LEDs are numbered 1 to 6, which corresponds to the numbers on the
DC outputs.
LED Off
The
STBY/
ACTIVE RPS1000 is
not powered
up.
The
DC
RPS1000 is
not powered
up.
TEMP The
RPS1000 is
not powered
up.
Chapter 2: Product Overview
Front-Panel Description
RPS1000—Business Series 380W RPS Unit Installation & Administration
Green Amber
The RPS1000 is in (Blinking) The RPS1000 is
active mode and in standby mode. You can
available to back- connect devices to the
up a failed RPS1000, and it does not
device. attempt to back them up
until you press the STBY/
ACTIVE button and place
the RPS1000 into active
mode.
The RPS1000 The DC output power is
internal power not functioning correctly.
supplies are up
and running.
The RPS1000 The RPS1000 is
internal approaching an over-
temperature is in temperature condition.
the acceptable
range.
Chapter
2
5