NETGEAR AFM735 - Fiber 100BASE-FX SFP LC GBIC Module Installation Manual

AFM735_IG_12July10.fm Page 1 Monday, July 12, 2010 12:45 PM
Installation Guide
ProSafe 100MBaseFX SFP Module AFM735
e
Install Your Optical Module
The 100MBaseFX SFP Module provides a full-duplex 100M bps each direction for
Ethernet operation on NETGEAR managed switches.
The switch will automatically detect the AFM735, so you can simply plug it into an
available module slot.
The module can be inserted or removed while the switch is operational.
AFM735
Installing a AFM735 Module
Insert the module firmly into the slot that supports the SFP interface. The AFM735
supports legacy 62.5/125µm OM1 multimode fiber cables up to 2km.
Removing a AFM735 Module
Release the module latch by pulling down the handle bar across the module, and pull
the module out of the module slot.
Table 1:
Technical Specifications
Standards IEEE 802.3-2002 100BaseFX
Wave Length 1310nm
Dimensions (HxWxD) 0.48" x 2.70" x 0.54"
(12.2mm x 68.56mm x 13.70mm)
Weight 0.055 lb (25g)
Operating Temperature 23 -158º F (-5 - 70ºC)
Storage Temperature -40 ~185 ºF (-40 ~ 85ºC)
Operative relative humidity 5 to 95% @ (25ºC)
Operating Distance Up to 2km for the 62.5/125µm MMF
Connectors LC
Power Consumption <1.2W
MTBF 1,587,201 Hrs(~181 years) at 25ºC
Safety Certification UL 60950-1,CSA C22.2 No. 60950-1-03
Environmental Compliance RoHS