Installing The Chassis Ground Connection - Cisco WS-C1924-A - Catalyst 1900 24 Ports 10MB Switch Hardware Installation Manual

Chapter 4 Installing and Connecting the Router
Figure 4-8
Figure 4-8
Figure 4-9
Figure 4-9

Installing the Chassis Ground Connection

Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Warning This equipment needs to be grounded. Use a green and yellow 12 to 14 AWG ground wire to connect
the host to earth ground during normal use. Statement 242
You must connect the chassis to a reliable earth ground, using a ground lug and size 14 AWG (2 mm
wire.
OL-19084-02
shows how to attach the brackets to the sides of the router with the back panel forward.
Bracket Installation for Back Mounting the Cisco 1940 Series ISR
DO NO T
RE MO VE
NE TW OR DU RIN G
K OP ER
AT IO N
DO NO T
RE MO VE
NE TW OR DU RIN G
K OP ER
AT IO N
shows how to attach the brackets to the rack.
Bracket Installation to Rack
DO NO T
RE MO VE
NE TW OR DU RIN G
K OP ER
AT ION
DO NO T
RE MO VE
NE TW OR
K OP ER
1
DU RIN G
AT ION
Cisco 1900 Series Hardware Installation

Installing the Chassis Ground Connection

2
)
4-9