NETGEAR DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router User Manual page 54

N300 wireless dual band adsl2+ modem router
Hide thumbs Also See for DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router:
Table of Contents

Advertisement

Field
Internet Port MAC Address
IP Address
DHCP
IP Subnet Mask
Domain Name
Server
LAN Port
MAC Address
IP Address
DHCP
IP Subnet Mask
Wireless
Name (11N
Port
SSID)
Name (11G
SSID)
Region
11N Channel
54 |
Chapter 4. Network Maintenance
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
Description
The Media Access Control address. This is the unique physical address being
used by the Internet (WAN) port of the N300 wireless modem router.
The IP address being used by the Internet (WAN) port of the N300 wireless
modem router. If no address is shown, or is 0.0.0.0, the N300 wireless modem
router cannot connect to the Internet.
• None. The N300 wireless modem router uses a fixed IP address on the
WAN.
• DHCP Client. The N300 wireless modem router obtains an IP address
dynamically from the ISP.
The IP subnet mask being used by the Internet (WAN) port of the N300
wireless modem router. For an explanation of subnet masks and subnet
addressing, click the link to the online document
Appendix E.
The Domain Name Server addresses being used by the N300 wireless modem
router. A Domain Name Server translates human-language URLs such as
www.netgear.com into IP addresses.
The Media Access Control address. This is the unique physical address being
used by the Ethernet (LAN) port of the N300 wireless modem router.
The IP address being used by the Ethernet (LAN) port of the N300 wireless
modem router. The default is 192.168.0.1 (http://www.routerlogin.net).
Identifies whether the firmware's built-in DHCP server is active for the
LAN-attached devices.
The IP subnet mask being used by the Ethernet (LAN) port of the N300
wireless modem router. The default is 255.255.255.0.
The 11N wireless network name (SSID) being used by the wireless port of the
N300 wireless modem router. The default is NETGEAR-DualBand-N.
The 11G wireless network name (SSID) being used by the wireless port of the
N300 wireless modem router. The default is NETGEAR-2.4-G.
The geographic region where the N300 wireless modem router is being used.
It might be illegal to use the wireless features of the N300 wireless modem
router in some parts of the world.
Identifies the 11N channel of the wireless port being used. Click the link to the
online document
Wireless Networking Basics
frequencies used on each channel. In Up to 300 Mbps at 5 GHz and 54 Mbps
at 2.4 GHz mode, there are two channels: a primary channel (P) and a
secondary channel (S).
TCP/IP Networking Basics
in Appendix E for the
in

Advertisement

Table of Contents
loading

Table of Contents