NETGEAR DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router User Manual page 40

Figure 21.
2. From the Service list, select the service that you want to add or edit.
3. Enter the settings to specify the service as explained in the following table.
Field
Action
LAN users
(outbound
services only)
Send to LAN
Server (inbound
services only)
40 | Chapter 3. Security Settings
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
Outbound Rules
• For outbound rules, ALLOW rules are
useful only if the traffic is already covered
by a BLOCK rule (that is, you want to
allow a subset of traffic that is currently
blocked by another rule).
• To define the schedule used in these
selections, use the Schedule screen (see
Scheduling Blocking on page 45).
These settings determine which computers
on your network are affected by this rule,
based on their source (LAN) IP address.
Select the option you want:
• Any. All local IP addresses are covered
by this rule.
• Address range. If this option is selected,
you must fill in the Start and Finish fields.
• Single address. Enter the required
address in the Start fields.
—
Inbound Rules
• For inbound rules, BLOCK rules are
useful only if the traffic is already covered
by an ALLOW rule (that is, you want to
block a subset of traffic that is currently
allowed by another rule).
• To define the schedule used in these
selections, use the Schedule screen (see
Scheduling Blocking on page 45).
—
Enter the IP address of the PC or server on
your LAN that will receive the inbound traffic
covered by this rule.