Table of Contents
Advertisement
Onscreen Quick Setup
Quick Setup makes it easy to get started with the NeoTV Streaming Player.
To use Quick Setup:
1.
After you connect your NeoTV Streaming Player, press Power on the NeoTV remote
control to turn it on.
2.
You might need to use your TV remote control to select the HDMI input where you
connected the NeoTV Streaming Player.
The NeoTV Quick Setup Welcome screen displays.
3.
Follow the onscreen setup instructions to select the following:
•
TV resolution. This is the output resolution to the TV.
•
Standby timing. Select the number of minutes that the NeoTV Streaming Player
waits to display a screen saver when media is not playing.
•
WiFi network. Select your home network. If you connected an Ethernet LAN cable,
you are not prompted to select a WiFi network.
•
The NeoTV Streaming Player checks for software updates.
4.
If an update is available, press the red, button on the lower part of the remote control:
NeoTV Streaming Player (NTV200)
Getting Started
11
Advertisement
Table of Contents
