Table of Contents
Advertisement
Wireless Connection
If you are using a wireless connection, place your player within range of your wireless
network. For best wireless reception, avoid enclosing your player in a cabinet.
Figure 3. Wireless network connection
If you do not receive a strong signal during the onscreen setup, rotate your player or move it
closer to your router.
Reset Button
There is Reset button on the bottom of the NeoTV Streaming Player. You can use the Reset
button to go to standby mode or to restore the unit to its factory settings.
•
Press Reset once and the NeoTV Streaming Player goes to standby mode. Press Reset
again to wake up the NeoTV Streaming Player.
•
To restore factory settings, press and hold Reset for 6 seconds. The unit power cycles
and returns to its factory settings.
NeoTV Streaming Player (NTV200)
Wireless router
Getting Started
10
To connect wirelessly, you can use
Wi-Fi Protected Setup (WPS), or you
can select your network and enter
its password using the onscreen
setup guide.
NeoTV200
Advertisement
Table of Contents
