System Requirements
Figure 5
Figure 5
System Requirements
The 3G-ANTM-OUT-LP antenna requires a Cisco 3G HWIC that uses a TNC-Male connector.
Installation Notes
This antenna is designed to be mounted outdoors on a horizontal panel.
Follow these guidelines to ensure the best possible performance:
Cisco Multiband Omnidirectional Panel-Mount Antenna (3G-ANTM-OUT-LP)
8
shows the E-plane radiation pattern at 1710 to 2170 MHz for the 3G-ANTM-OUT-LP antenna.
E-Plane Pattern at 1710 to 2170 MHz
OL-17930-01