setup screen
Configuring public DDNS in Camera Settings
1.
Open the DDNS settings page and select <Public DDNS> for <DDNS>.
2.
Enter the corresponding site's host name, user name and password.
3.
Click [Apply (
If the connection properly establishes, <(Success)> appears.
4.
When done, click [Apply (
IP filtering
You can create a list of IPs that you want to grant or deny access to them.
1.
From the Setup menu, select the
<Network (
2.
Click <IP filtering>.
3.
Select <Filtering type>.
•
Deny : If selecting this, access from
those IPs that are added to the
filtering will be restricted.
•
Allow : If selecting this, access from
only those IPs that are added to the
filtering will be accepted.
4.
Provide the IP that you want to grant or
deny access from.
For IPv4, the default IP address is
0.0.0.0, and the default prefix is 32.
5.
Select desired IP address to be approved or rejected from the entered IP addresses.
Only the selected IPs are filtered out.
6.
When done, click [Apply (
46_ setup screen
)] button.
)].
)> tab.
)].