Table of Contents
Advertisement
Settings
(continued)
5-2 Input Page
This page is for setting the video and audio input parameters.
This page can be used upon access via AadminB or AoperatorB. Press the AOKB button to enable the new settings upon changing. If
the AOKB button is pressed upon entering an invalid value, a warning message will appear and entry will be denied. Press the
ACancelB button to restore the invalid entry to the current value.
A Camera Name
B Brightness
C Contrast
D Saturation
E Phase
F Turnover
G Echo Suppressor
H Noise Suppressor
A
Texts entered here is stored in the JPEG comment segment. Refer to A
format of VN-E4 JPEG.
For adjusting brightness. Setting range is between 0 and 100.
For adjusting contrast. Setting range is between 0 and 100.
For adjusting color saturation. Setting range is between 0 and 100.
For adjusting hue. Setting range is between 0 and 100.
For flipping the image upside down.
NOTE:
The Flag specified here is stored in the JPEG comment segment. Switching this parameter does
not invert image data itself in JPEG. Refer to A
For reducing audio echo. Use this when bi-directional audio is used.
For reducing the noise in audio data that is input to VN-E4. Audio output from VN-E4 will not be
affected. Enhancing the setting may increase the effectiveness of removing noises, but it also
comes with a trade-off of deterioration in sound quality.
B
C
D
G
H
GUIDEB on file format of VN-E4 JPEG.
E
F
GUIDEB on file
23
Advertisement
Table of Contents
