Honeywell HD3C User Manual page 18

Note Please use the supplied DC Iris and Line lock adjustment tool
to adjust picture brightness and phase adjustment.
Picture Brightness
level. L (low) makes the picture darker. H (high) makes the picture brighter.
Phase Adjustment
phase difference between cameras. Make sure Switch 7 is ON to activate
the Line lock function (AC operation only).
DIP Switches
(#3) to activate or deactivate the following functions:
Switch High Res + TDN
1 DC/AES
2 AWB/ATW
3 BLC ON/OFF
4 AGC ON/OFF
5 TDN
6 FLK ON/OFF
7 LL ON/OFF
8 Not used
18
Use the LEVEL screw (#1) to compensate for the iris
Use the V Phase Adjustment Pot (#2) to adjust the
Depending on your camera model, set the DIP switches
High Res
DC/AES
AWB/ATW
BLC ON/OFF
AGC ON/OFF
Not used
FLK ON/OFF
LL ON/OFF
Not used
Standard Res
DC/AES
AWB/ATW
BLC ON/OFF
AGC ON/OFF
FLK
LL ON/OFF
Not available
Not available