NETGEAR PS121 - USB Mini Print Server User Manual page 27

8. Scroll and select your printer manufacturer, and your printer model, and then click Next.
Note: If you do not see your make and model of printer in the lists, and you are
connected to the Internet, you can click the Windows Update button to
download additional printer software from the Microsoft website, or you
can click the Have Disk button to install the printer software from a disk
you have.
If the printer software is already installed on this computer, the Add Printer Wizard will inform
you and let you keep the existing driver.
9. The Name Your Printer screen prompts for a descriptive name and whether you want it to be
the default or not. When entering a name, choose a descriptive name that identifies this printer
as a TCP/IP printer. Enter your choices and then click Next to proceed.
Upon completion of the Add Printer Wizard, you are prompted to print a test page.
Figure 2-13
10. Click Print a test page, and then click Finish.
11. Check the printer attached to the USB Multifunction Print Server to verify that the test page
printed successfully. If you are unable to print a test page, see
Installation and Setup
NETGEAR USB Multifunction Printer Server PS121v2 User Manual
v2.0, April 2007
Chapter 4, "Troubleshooting"
2-11