D-Link DCS-5605 User Manual page 44

Auto Gain
Controls the gain of a signal. Using AGC means that weaker signals receive more gain and stronger signals receive less
Control
gain or none at all.
Back Light
When an object is in front of bright lights it is difficult for IP camera to capture the image clearly. Selecting this option can
Compensation allow objects to become clearer when exposed to bright lights.
2D Noise 2D noise reduction can reduce noise on the image by maintaining smooth edges on moving objects. However, the noise
Reduction reduction effect is limited.
3D Noise It includes both temporal and spatial domain noise reduction. The noise reduction performance is very high and the gain
Reduction is programmable. The noise reduction is very powerful for the random and gaussian noise, especially videos from RF
signal with noise.
Preferred Mode User can choose "Aperture-preferred", "Shutter-preferred" or "Manual" for Preferred Mode setting.
IRIS Mod User can choose "Auto" or "Manual" for IRIS Mode setting.
IRIS Value Use this pull-down menu to select an aperture setting in percent when the Auto Iris setting is set to Manual.
Sens-Up If pictures are not clear due to darkness, this SENS-UP operation would increase the sensitivity of picture.
Sens-Up Limit Once "Sens-Up: AUTO" mode is set, the user can configure the SENS-UP limit by increasing/decreasing the shutter speed
(e.g.: X2, X4....... X128).
Shutter Mode User can choose "Auto" or "Manual" for Shutter Mode setting.
Shutter Value Select the shutter speed from list box and then the camera will then set the matching aperture value for a proper exposure.
White Balance It is 'Auto' by default. It will remove the unrealistic color casts, so that objects which appear white are rendered white in
the video.
Indoor color temperature range : 3000~10,500°K
Outdoor color temperature range : 1,800~10,500°K
Red Offset Adjust the Red Level percentage of the image when White Balance is set to Manual.
Blue Offset Blue Offset - Adjust the Blue Level percentage of the image when White Balance is set to Manual.
Wide Dynamic The main function of the WDR is to accumulate the scope of contrast between the brightest and darkest points in the
Range picture. With the "On" option, the distribution of brightness values is automatically adapted to the recording scenario.
De-interlace De-interlace - The De-interlacing option helps to improve the image quality. It reduces the effects of interlacing. Click this
checkbox to set "de-interlacing on"
D-Link DCS-5605/DCS-5635 User Manual 43