xStack Storage DSN-Series SAN Arrays
VMware ESX 3.0.2 & 3.5
ESX 3.5 Configuration
Connectivity from a host running VMware's ESX 3.5 server to iSCSI storage is much similar to
ESX 3.0.2 Server in the above configuration. However, there are some basic differences noted in
this section.
This section lists the steps required to configure the software initiator on the VMware ESX 3.5
Server. Connect to the ESX server/VirtualCenter using VI Client, and follow the below steps:
1. Select Configuration->Security Profile on the ESX server.
Figure 12: Security Profile Configuration Tab
17
D-Link Systems, Inc.
Page
December 2, 2009