Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual page 779

Chapter 41 Configuring QoS
Setting the QoS Statistics Data Export Time Interval
The default interval at which QoS statistics is exported is 30 seconds. To set the time interval for the
QoS statistics data export, perform this task in privileged mode:
Task
Step 1
Set the time interval for the QoS statistics data
export.
Step 2
Verify the configuration.
This example shows how to set the QoS statistics data export interval and verify the configuration:
Console> (enable) set qos statistics export interval 500
Time interval set to 500
Console> (enable) show qos statistics export info
Statistics export status and configuration information
------------------------------------------------------
Export status: enabled
Export time interval: 500
Export destination:172.20.52.3 SYSLOG facility LOG_LOCAL6 (176), severity LOG_DE
BUG (7)
Port
------
1/1
1/2
3/1
3/2
5/1
5/2
<output truncated>
Aggregate name
--------------
ipagg_3
Console> (enable)
Configuring QoS Statistics Data Export Destination Host and UDP Port
To configure the QoS statistics data export destination host and UDP port number, perform this task in
privileged mode:
Task
Step 1
Configure the QoS statistics data export
destination host and UDP port number.
Step 2
Verify the configuration.
This example shows how to configure the QoS statistics data export destination host and UDP port
number and verify the configuration:
Console> (enable) set qos statistics export destination stargate 9996
Statistics data export destination set to stargate port 9996.
Console> (enable) show qos statistics export info
Statistics export status and configuration information
------------------------------------------------------
Export status: enabled
78-13315-02
Export
--------
disabled
disabled
disabled
disabled
enabled
disabled
Export
--------
enabled
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
Command
set qos statistics export interval interval
show qos statistics export info
Command
set qos statistics export destination {host_name
| ip_address} [syslog [facility | severity] port]
show qos statistics export info
Configuring QoS
41-73