Cannot Access The Nss Through Ftp - Linksys NSS6000 Series Administrator's Manual

Troubleshooting

Cannot Access the NSS through FTP

STEP 1
STEP 2
STEP 3
STEP 4
Cannot Access the NSS through FTP
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
To resolve the problem:
From the Manager Menu, click Storage
If the problem is due to the volume being locked, the Unlock button appears next
to the volume in the Action column.
Click Unlock.
Enter the password for the volume.
Click OK.
You can now be create a share or quota for the volume.
Users attempt to log into the NSS through FTP but are unable to access their home
directory or shares on the NSS.
To resolve the problem, you need to configure these settings to enable
FTP access:
From the Manager Menu, click Shares
Make sure that Enable FTP is selected. (You can go through the settings on this
page to ensure they are correctly defined.)
Close the FTP Setup page.
From the Manager Menu, click Shares
Click Edit for the applicable share.
Make sure the FTP protocol is selected, and then click Update.
From the Manager Menu, click Access
Make sure there are no filters set up to drop or reject FTP access for the
applicable IP or MAC addresses.
Volumes.
FTP Setup.
Shares.
Network.
A
164