Configuring The Timing Settings - Linksys NSS6000 Series Administrator's Manual

Managing the NSS

Configuring the Timing Settings

STEP 1
STEP 2
STEP 3
STEP 4
Configuring the Timing Settings
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
From the Manager Menu, click Admin
The Configuration Manager page appears.
If the configuration file is located in a location on your network, install it onto a USB
flash device and then insert the USB flash device into the AUX-1 port on the front of
the NSS chassis.
Click Restore.
A list of saved configuration files appear.
Click Delete for each configuration file you want to remove.
If you are installing the NSS within the Linksys One environment, the NSS time is
automatically set via the Linksys NTP server.
When you first configure the NSS, ensure that the NSS has successfully
synchronized the time with the NTP server. When the NSS is synchronizing with
the NTP time server, the "Synchronizing time with NTP server" message appears
and the Update button is grayed out. After the synchronization is complete, you
can manually refresh the page by reselecting the NTP Configuration page from
the Manager Menu.
Configuration.
7
140